Pricing Crime Insurance With a Social Engineering Sublimit: A Worked Example
A hypothetical 120-person distributor shows what crime cover typically costs in 2026, and what it costs to raise the social engineering sublimit that many base policies cap well below the headline limit.
Why the social engineering sublimit matters more than the headline limit
The headline limit on a crime policy tells you less than you'd think. The number that decides whether a fraudulent wire gets reimbursed is usually the social engineering sublimit. On many base wordings it sits in the low six figures, often somewhere around $100,000 to $250,000, even when the policy limit is $2 million or more. So before you compare quotes, find out what the policy pays when someone in accounts payable is tricked into sending money. That question matters more than what it pays when an employee steals it.
For a mid-size business, commercial crime insurance cost depends less on headcount than on how much money goes out each week and how easily that flow can be redirected. For a company with a clean loss history, typical 2026 market ranges run from roughly $6,000 to $25,000 a year, depending on the limit, the retention and how much social engineering cover you buy. These are indicative USD ranges. They vary by contract, insurer and country, so confirm them with your broker.
Below, one labelled hypothetical company shows how each of those levers moves the price.
The hypothetical: a 120-person distributor with a busy payables desk
Hypothetical example. Say a 120-person industrial parts distributor has about $60 million in annual revenue, a head office and two regional warehouses in different countries. Its profile:
- Finance team of 12, including 5 in accounts payable
- Around 900 active suppliers, about 40 of them overseas
- Weekly outbound payments averaging $1.2 million, with single supplier invoices of up to $400,000
- Payments released through a bank portal that requires two approvers above $50,000
- One prior incident three years ago: a $35,000 invoice redirection, absorbed and never claimed
- No crime policy. Its cyber policy carries a $100,000 funds transfer fraud extension
That last point is common, and it misleads buyers. Many assume the cyber policy already handles payment fraud. Cyber wordings typically respond to fraudulent transfers caused by a network compromise, and some add a modest social engineering extension. Crime policies are the traditional home for employee theft (fidelity), computer fraud and larger social engineering limits. Here, the $400,000 maximum invoice is the number to plan around.
Indicative premiums at three overall limits
Here's how a standalone crime quote might look for this company, with the insurer's standard social engineering sublimit at each option.
| Policy limit | Standard retention | Default social engineering sublimit | Indicative annual premium (USD) |
|---|---|---|---|
| $1 million | $25,000 | $100,000 | $6,000 – $10,000 |
| $2 million | $25,000 | $250,000 | $9,000 – $15,000 |
| $5 million | $50,000 | $250,000 | $16,000 – $25,000 |
Typical 2026 market ranges for illustration only. Actual pricing varies by insurer, controls, loss history and jurisdiction.
Doubling the limit doesn't double the premium. Upper layers are less likely to be hit, so each extra dollar of limit costs less. But look at what stays flat: the social engineering sublimit stops at $250,000 at both the $2 million and $5 million options. Buying $5 million without fixing the sublimit means paying for employee-theft capacity the distributor probably won't use, while its most likely loss stays underinsured. For most companies this size, $2 million is the better base limit, with the extra spend going into the sublimit.
What raising the social engineering sublimit costs
Social engineering cover is expensive per dollar because it's one of the most frequently claimed crime perils. Starting from the $2 million option, the sublimit might be priced like this:
| Social engineering sublimit | Indicative additional premium (USD) | Typical underwriting conditions |
|---|---|---|
| $250,000 (default) | Included | Standard application questions |
| $500,000 | $2,500 – $6,000 | Supplemental fraud questionnaire; documented callback procedure |
| $1,000,000 | $7,000 – $15,000 | Callback to a pre-verified number, dual authorization, vendor-change controls; may carry a separate higher retention or coinsurance |
Typical 2026 market ranges; confirm with insurers.
For the distributor, $500,000 is the right target. It clears the largest single invoice, which is what a supplier impersonation would usually redirect. Above that, the cost per extra dollar of cover climbs steeply, and the coinsurance often attached to the $1 million tier means the company still funds part of any loss. That tier earns its price only when single payments regularly exceed $500,000, or when treasury moves intercompany funds that a fake-executive request could target.
Recommended structure, all in: roughly $11,500 to $21,000 a year for a $2 million crime policy with a $500,000 social engineering sublimit.
Verification controls that actually move the quote
Underwriters price social engineering mainly on controls, and a higher sublimit is often unavailable until specific procedures exist in writing. Expect questions on these:
- Out-of-band callback to a phone number already on file, never one supplied in the request, before any change to supplier bank details.
- Dual authorization above a set threshold, with the two approvers in separate roles.
- Vendor master file controls: bank-detail changes made by someone other than the person who pays invoices, plus a waiting period before the first payment to new details.
- Email authentication, with DMARC at enforcement on your own domains and external-sender tagging.
- Recurring fraud training for finance staff, with completion logged.
The callback and vendor-change controls carry the most weight, because supplier-impersonation fraud typically succeeds at the moment bank details change. Our distributor already has dual approval but no written callback rule. Adding and documenting one could be the difference between an offer of $250,000 and one of $500,000, and with some insurers it may also reduce the loading for the higher sublimit. Treat any discount as something to negotiate, not a given.
One caution. If the wording makes cover conditional on following a procedure, a single skipped callback can sink the claim. Ask whether verification is a condition precedent or a rating factor, and have the wording reviewed before you bind.
Crime policy retention: where raising it stops paying
A higher retention lowers premium, but the savings shrink quickly. Indicative effects on the $2 million option:
- $10,000 retention: roughly 10–15% more than the $25,000 base
- $25,000 retention: base price
- $50,000 retention: roughly 8–12% less
- $100,000 retention: roughly 15–20% less
On a $13,000 premium, going from $25,000 to $100,000 might save $2,000 to $2,600 a year. In return, the company absorbs an extra $75,000 of every loss. With a $35,000 incident already on record, that's a bad trade for the distributor. A $25,000 to $50,000 retention suits most companies this size.
Check, too, whether social engineering has its own retention. Many policies set a higher one for that peril than for employee theft. A policy advertising a $25,000 retention that applies $50,000 to social engineering is, for the loss you're most likely to have, a $50,000-retention policy.
How social engineering sublimits differ in London, Europe and Asia
Where you place cover affects how much social engineering capacity you can get and how it's structured.
London market
Lloyd's and London company markets write comprehensive crime wordings for international buyers and tend to be the most flexible on social engineering sublimits. Buyers with strong documented controls can often obtain sublimits well above standard defaults, usually with coinsurance or a separate retention attached. For a multinational distributor that wants one programme across several countries, London is often the practical starting point.
Continental Europe
In German-speaking markets, fidelity insurance (Vertrauensschadenversicherung) is an established line, and many wordings address fake-president and payment-diversion fraud, sometimes within the main limit and sometimes as a sublimit. Insurers in France, the Benelux countries and the Nordics sell comparable fraud covers. Wordings vary considerably by country, and local rules on policy language, admitted cover and insurance premium tax shape how a programme is placed. Premium taxes are added on top of the rates above and differ by country.
Asia and other growth markets
In Singapore and Hong Kong, crime cover is widely available, but locally issued policies are often more conservative on social engineering and may need a specific endorsement. In India and parts of the Middle East, traditional fidelity guarantee policies focus on employee dishonesty, and third-party impersonation cover may be limited or require specialist placement. In Latin America and Africa, buyers often reach meaningful capacity through regional insurers backed by London or European reinsurance.
With operations in several countries, ask your broker whether you need a global master policy with local policies beneath it to satisfy local insurance rules, and have a licensed broker in each key jurisdiction confirm the answer.
Red flags in a crime quote and a rule for choosing the sublimit
Before binding, check the quote for these warning signs:
- A social engineering sublimit below your largest routine single payment
- A separate, higher retention or coinsurance on social engineering that the quote summary doesn't show
- Verification procedures written as conditions precedent with no allowance for honest error
- Definitions covering impersonation of vendors but not of executives or clients
- Overlap with your cyber policy's funds transfer fraud cover, with no clause saying which responds first
- Loss-discovered and loss-sustained bases mixed across policies, which can leave gaps when you change insurers
Decision rule: set the social engineering sublimit at or just above your largest routine single outbound payment. Choose the lowest overall limit that covers a realistic multi-year employee theft scenario. Then bring the price down with documented callback and vendor-change controls, not a higher retention.
Next step: pull your top 20 supplier payments from the last 12 months, write down your current verification procedure, and send both to your broker with the request for quotes.
Questions buyers ask
How much does commercial crime insurance cost for a company with about 100–150 employees?
For a company with a clean loss history, typical 2026 market ranges run from roughly $6,000 to $25,000 a year in USD, depending on the limit, the retention and the social engineering sublimit. Payment volumes, controls and the country where the policy is issued affect price more than headcount. Confirm figures with a broker, since local pricing and premium taxes differ.
What is a social engineering sublimit?
It's a cap, inside the overall crime limit, on what the insurer pays when an employee is tricked into sending money, for example by a fake supplier email or a fake executive request. Base sublimits in the low six figures are common even on policies with multimillion-dollar limits. Raising it usually costs extra and requires documented verification controls.
Doesn't my cyber policy already cover funds transfer fraud?
Often only partly. Cyber policies typically cover fraudulent transfers caused by a network compromise, and some add a modest social engineering extension. Crime policies usually offer larger social engineering limits and also cover employee theft. Ask a broker to map the two policies against each other so you know which responds first.
Will raising my crime policy retention save much money?
Usually less than buyers expect. Moving from a $25,000 to a $100,000 retention might cut premium by somewhere around 15–20%, often only a few thousand dollars a year, while you take on the extra loss. Also check whether social engineering claims carry a separate, higher retention.
Which controls do insurers care about most for social engineering cover?
Calling back on a phone number already on file before changing supplier bank details, and separating bank-detail changes from payment release. Dual authorization above a threshold, DMARC enforcement on your email domains and recurring finance-team training also help. Find out whether these are rating factors or conditions precedent, because a breached condition precedent can defeat a claim.
Can one crime policy cover subsidiaries in several countries?
Often yes, through a global master policy, commonly placed in London or a major European market, with local policies issued where local rules require admitted cover. Sublimit availability, premium taxes and wording standards vary by country, so have a licensed broker with reach in each key jurisdiction confirm the structure before you bind.
Written by the Auditvault Pro editorial team. Prices, features and rules change often - confirm details with the vendor or a licensed professional before you decide.